SUPPORT
YOUR SETUP
ACKCIO BEAM · SNAPE 2.0

Set up your Ackcio system on Snape 2.0

Eight steps, from unboxing to dashboards and alerts. Start at step 1 and work along.

STEP 1Introduction and equipmentAll 5 guides
STEP 2Gateway hardware and installation
STEP 3Connecting to the gateway
STEP 4Gateway settingsAll 11 guides
STEP 5Snape software
STEP 6Node commissioningAll 12 guides
STEP 7Post-commissioningAll 6 guides
STEP 8Grafana visualisation and alertsAll 6 guides
1
STEP 1 OF 8

Introduction and equipment

5 guides
  1. Product overviewKC-02-001
  2. Equipment overview: gateway and nodesKC-02-002
  3. AccessoriesKC-02-003
  4. Gateway pre-deployment checklistKC-01-001
  5. Node pre-deployment checklistKC-01-002
2
STEP 2 OF 8

Gateway hardware and installation

3 guides
  1. Gateway overview and LEDsKC-02-004
  2. Install your gatewayKC-02-005
  3. Power your gatewayKC-02-006
3
STEP 3 OF 8

Connecting to the gateway

3 guides
  1. Connect to the gateway over its Wi-FiKC-02-007
  2. Connect to the gateway over LANKC-02-008
  3. Change the gateway loginKC-02-009
4
STEP 4 OF 8

Gateway settings

11 guides
  1. The Settings pageKC-02-045
  2. Update gateway software and firmwareKC-02-010
  3. Shut down, restart or restore the gatewayKC-02-011
  4. Gateway health overviewKC-02-012
  5. Gateway activity overviewKC-02-013
  6. Date and NTP settingsKC-02-014
  7. Radio settingsKC-02-015
  8. Network settingsKC-02-016
  9. Internet settingsKC-02-017
  10. Data upload settings (API and FTP)KC-02-018
  11. Remote access settingsKC-02-019
5
STEP 5 OF 8

Snape software

3 guides
  1. Snape 2.0 main dashboardKC-02-020
  2. Node summary panelKC-02-021
  3. Sensor summary panelKC-02-022
6
STEP 6 OF 8

Node commissioning

12 guides
  1. Equipment checkKC-02-023
  2. Node overview: battery, buttons, ports and LEDsKC-02-024
  3. Prepare your nodeKC-02-025
  4. Install your nodesKC-02-026
  5. Download the Ackcio Nimbus appKC-02-027
  6. Turn on permanent node loggingKC-02-028
  7. Download your project configurationKC-02-029
  8. Connect your Android phone to a nodeKC-02-030
  9. Set up your nodeKC-02-031
  10. Wire and set up your sensors (by node type)
  11. Sync node settings with your gatewayKC-02-032
  12. Commissioning reminders for all nodesKC-04-007
7
STEP 7 OF 8

Post-commissioning

6 guides
  1. Apply engineering formulasKC-02-033
  2. Export data from your gatewayKC-02-034
  3. Export data from your nodeKC-02-035
  4. Export and import project configurationKC-02-036
  5. Update node firmware with your Android phoneKC-02-037
  6. Run a range test with your nodeKC-02-038
8
STEP 8 OF 8

Grafana visualisation and alerts

6 guides
  1. Introduction to GrafanaKC-02-039
  2. Open Grafana from Snape 2.0KC-02-040
  3. Email alerts, part A: SMTP set-upKC-02-041
  4. Email alerts, part B: create an alert ruleKC-02-042
  5. Grafana known limitationsKC-02-043
  6. Export data for your own analysisKC-02-044

Need help?

FREQUENTLY ASKED QUESTIONS
Battery and power managementHPCGateway set-up and operationGateway and node mounting best practicesNetwork test and noise testConnectivity and networkRemote access and securityData management and SnapeNode operation and troubleshootingSensor errors and diagnosticsSpecific node types and sensorsGeneral
On Snape 1.0 or no gateway?

Switch your setup at the top.

Still stuck?

Email [email protected].