SUPPORT
YOUR SETUP
ACKCIO BEAM · SNAPE 1.0

Set up your Ackcio system on Snape 1.0

Seven steps, from unboxing to exporting your data. Start at step 1 and work along.

STEP 1Introduction and equipmentAll 5 guides
STEP 2Gateway hardware and installation
STEP 3Connecting to the gateway
STEP 4Gateway settingsAll 11 guides
STEP 5Snape software
STEP 6Node commissioningAll 12 guides
STEP 7Post-commissioningAll 6 guides
1
STEP 1 OF 7

Introduction and equipment

5 guides
  1. Product overviewKC-02-001
  2. Equipment overview: gateway and nodesKC-02-002-S1
  3. AccessoriesKC-02-003-S1
  4. Gateway pre-deployment checklistKC-01-001-S1
  5. Node pre-deployment checklistKC-01-002-S1
2
STEP 2 OF 7

Gateway hardware and installation

3 guides
  1. Gateway overview and LEDsKC-02-004
  2. Install your gatewayKC-02-005
  3. Power your gatewayKC-02-006
3
STEP 3 OF 7

Connecting to the gateway

3 guides
  1. Connect to the gateway over its Wi-Fi (Snape 1.0)KC-02-007-S1
  2. Connect to the gateway over LAN (Snape 1.0)KC-02-008-S1
  3. Change the gateway login (Snape 1.0)KC-02-009-S1
4
STEP 4 OF 7

Gateway settings

11 guides
  1. The Settings pageKC-02-045-S1
  2. Update gateway software and firmware (Snape 1.0)KC-02-010-S1
  3. Shut down, restart or restore the gateway (Snape 1.0)KC-02-011-S1
  4. Gateway health overview (Snape 1.0)KC-02-012-S1
  5. Gateway activity overview (Snape 1.0)KC-02-013-S1
  6. Date and NTP settings (Snape 1.0)KC-02-014-S1
  7. Radio settings (Snape 1.0)KC-02-015-S1
  8. Network settings (Snape 1.0)KC-02-016-S1
  9. Internet settings (Snape 1.0)KC-02-017-S1
  10. Data upload settings (API and FTP) (Snape 1.0)KC-02-018-S1
  11. Remote access settings (Snape 1.0)KC-02-019-S1
5
STEP 5 OF 7

Snape software

3 guides
  1. Create a project (Snape 1.0)KC-02-020-S1
  2. Node summary panel (Snape 1.0)KC-02-021-S1
  3. Sensor summary panel (Snape 1.0)KC-02-022-S1
6
STEP 6 OF 7

Node commissioning

12 guides
  1. Equipment checkKC-02-023-S1
  2. Node overview: battery, buttons, ports and LEDsKC-02-024-S1
  3. Prepare your nodeKC-02-025
  4. Install your nodesKC-02-026
  5. Download the Ackcio Nimbus appKC-02-027
  6. Turn on permanent node loggingKC-02-028
  7. Download your project configurationKC-02-029
  8. Connect your Android phone to a nodeKC-02-030-S1
  9. Set up your nodeKC-02-031
  10. Wire and set up your sensors (by node type)
  11. Sync node settings with your gatewayKC-02-032
  12. Commissioning reminders for all nodesKC-04-007
7
STEP 7 OF 7

Post-commissioning

6 guides
  1. Apply engineering formulas (Snape 1.0)KC-02-033-S1
  2. Export data from your gateway (Snape 1.0)KC-02-034-S1
  3. Export data from your nodeKC-02-035
  4. Export and import project configuration (Snape 1.0)KC-02-036-S1
  5. Update node firmware with your Android phoneKC-02-037
  6. Run a range test with your nodeKC-02-038

Need help?

FREQUENTLY ASKED QUESTIONS
Battery and power managementHPCGateway set-up and operationGateway and node mounting best practicesNetwork test and noise testConnectivity and networkRemote access and securityData management and SnapeNode operation and troubleshootingSensor errors and diagnosticsSpecific node types and sensorsGeneral
On Snape 2.0 or no gateway?

Switch your setup at the top.

Still stuck?

Email [email protected].