BEAM-DG
Digital Node
For digital sensors on RS485, RS232 and SDI-12.
Guides with a Snape 1.0 version open that version when your setup is Snape 1.0.
Wire and set up this node
- Wire and set up a BEAM-DG nodeKC-04-004
Guides for all nodes
- Equipment overview: gateway and nodesKC-02-002
- Equipment checkKC-02-023
- Node overview: battery, buttons, ports and LEDsKC-02-024
- Prepare your nodeKC-02-025
- Install your nodesKC-02-026
- Connect your Android phone to a nodeKC-02-030
- Set up your nodeKC-02-031
- Sync node settings with your gatewayKC-02-032
- Update node firmware with your Android phoneKC-02-037
- Run a range test with your nodeKC-02-038
- Node pre-deployment checklistKC-01-002
- Sensor wiring and set-up: overviewKC-04-001
- Commissioning reminders for all nodesKC-04-007
FAQs
- FAQ: Battery and power managementKC-03-001
- FAQ: HPCKC-03-002
- FAQ: Gateway and node mounting best practicesKC-03-004
- FAQ: Network test and noise testKC-03-005
- FAQ: Node operation and troubleshootingKC-03-009
- FAQ: Sensor errors and diagnosticsKC-03-010
- FAQ: Specific node types and sensorsKC-03-011