Network settings
Snape 2.0Version 1.1 · 6 November 2026KC-02-016
This guide is for Snape 2.0. Other versions: Snape 1.0.
Configuring Network Settings
Each Gateway creates its own Wi-Fi network. The Network panel allows you to change the WiFi setting that you can use to connect to the Gateway.
1.Click on the three dots in the “Network” panel of your gateway.
2.You are permitted to change the PASSWORD but not the WIFI SSID
Did you know?To prevent your gateway’s assigned subnet from clashing with your existing network, you can change the IP address accordingly. Click on the “Save” button to apply the new settings to the gateway.