Sensor wiring and set-up: overview
Snape 1.0 and StandaloneVersion 1.1 · 6 November 2026KC-04-001-S1
This guide is for Snape 1.0 and Standalone. Other versions: Snape 2.0.
Nodes covered in this guide:
- BEAM-AN : Analogue Node: voltage, current loop, resistance sensors
- BEAM-VW : Vibrating Wire Node: VW sensors, piezometers, strain gauges
- BEAM-DG : Digital Node: RS485/RS232/SDI-12 digital sensors
- BEAM-TM : Tilt Monitoring Node: integrated MEMS sensor (no external wiring)
- BEAM-RN : Repeater Node: no sensor connection required