SUPPORT
YOUR SETUP
SNAPE 2.0 SETUP GUIDEStep 1 of 8 · Introduction and equipment Guide 1 of 5 in this stepSee all steps
SNAPE 1.0 SETUP GUIDEStep 1 of 7 · Introduction and equipment Guide 1 of 5 in this stepSee all steps

Product overview

All (Snape 1.0 and Snape 2.0)Version 1.1 · 6 November 2026KC-02-001

This manual explains the basic set up process for the Ackcio BEAM family of devices as follows:

  • BEAM-GW-HW 3.6
  • BEAM-AN-S1
  • BEAM-AN-S4
  • BEAM-DG
  • BEAM-RN
  • BEAM-TM
  • BEAM-VW-S1
  • BEAM-VW-S8
  • BEAM TM-L
Screenshot

Ackcio Beam

Wireless sensor networks are vital in monitoring construction sites, large structures and landslide areas. They are extensively used in applications where geotechnical and other sensors are needed for data collection and transfer to a central server for access by multiple users. Ackcio offers a state-of-the-art network solution that allows real-time monitoring of geotechnical and structural sensors in even the most challenging conditions with reliable data transfer without any delay.

Ackcio Mesh

Ackcio’s Beam devices provide a long-range wireless solution for data acquisition in rugged deployments, with enclosures rated to IP67 to withstand outdoor conditions in temperatures ranging from -40℃ to 80℃. They consume very little power, and our Ackcio Mesh radio protocol allows for long range communications of up to 5km range in ideal conditions. The system operates on the Sub-1 GHz band that is adjustable to the requirements of each territory. Each node also acts as a repeater to assist nodes in areas without a direct connection to the gateway. This allows our devices to form a robust network in environments where other wireless solutions would not be suitable.

Ackcio Snape

Ackcio’s simple and easy to use Snape data management software comes installed on your gateway, allowing you to configure the flow of data for your entire project and ensure that data is collected and transmitted to your server. We offer quick and secure 3rd party integrations with out of the box compatibility for popular platforms like Sensemetrics, VDV, and more. Snape also gives users the ability to access their project using public IP addresses or by using remote.it permanent URL link which we offer FOC as a value- added services.

Ackcio Nimbus

Ackcio Nodes are commissioned through Ackcio’s Nimbus 2.0 (Version 5.2.26.0113) mobile application for Android devices (Android Version 8.0 and above). Nimbus offers simple and intuitive device setup as well as diagnostic tools like network and noise tests that can help users determine the optimal layout for their network. The Nimbus app can also be used to perform firmware updates, test your sensor readings, and share logs for remote troubleshooting.

3rd-Party Integrations

Ackcio’s nodes support a wide range of sensors and platforms. Our development team is working hard every day to add more 3rd-party integrations to our offering.

Still stuck? Email [email protected].Product: General